Name: Ingenuity My Bath Seat for Sit-Up Baby Bathing Grey
SKU: MY-IGT19620L3
Availability: InStock

Easy to use so you can get back to baby.


Helpful hints Keep babys favorite bath seat in top form with these helpful tips. To keep babys seat clean, always surface clean the suction cups, suction cup protectors, and bath seat with mild soap and warm water. Dry with a clean towel, and always make sure the seat is completely dry before long-term storage. To protect the seat, be sure to place the suction cup protectors over the suction cups when the seat is not in use. Before bath time, note the Max Fill Line located on the seat. When filling the tub, ensure that the water does not pass this line. And of course, always remember to stay with your baby when theyre in or near water.	Easy to clean and remove Bath time all done? Remove the My Bath Seat in a few quick steps. First, turn all locking dials toward the unlock icons. Next, pull on the cup tabs to break the seal with the tub wall. Turn the locking dials on the side extending arms until they no longer touch the interior walls of the tub. To remove the rear suction cup, rotate the locking dial counterclockwise and pull on the suction cup tabs to release suction from the rear wall. Press the suction cup tabs on the base of the seat to release the cups from the tub floor. Then press both locking tabs on the rear extending arm inward and push back fully into the seat. After drying, place the included cup protectors over suction cups after each use.	Installs in a snap Before use, remove the suction cup protectors and place aside. To install the seat, first place the seat at the rear of the tub. Next, fully extend the rear locking arm until both locking tabs click open on the back of the seat. Once the rear suction cup is flush with the rear tub wall, firmly press the suction cup to the tub wall. Turn the locking dial clockwise to secure the rear cup in place. (This rear suction cup will swivel or rotate to accommodate rear tub walls.) Next, secure the side arms by rotating the locking dials on the extending side arms. Be sure to do this evenly until the side cups touch the side walls of the tub. Once in place, turn the locking dial toward the lock icon. Continue rotating the dials until the red indicators can no longer be seen. For babys safety, be sure to check that the bath seat and all 3 suction cups are securely locked before placing baby in the seat.